Linux install failing

Page 1 of 1 [ 12 posts ]

Joined: 7 Mar 2010
Age: 27
Gender: Male
Posts: 777
Location: In the zone

27 Jul 2011, 10:10 am

Hey.

When you can get it installed its like the best thing ever.
But to get it installed... Impossible (For me that is).

Im trying to install Kubuntu 10.10 on my desktop:

3GB DDR2 Ram
Nvidia GeForce 7500LE 256Mb
Intel VIIV Dual Core CPU @ 2.8 Ghz

The setup went fine yesterday.
It went like a brease.
But I installed Kubuntu in a new partition and thought that GRUB would not work if it was in the new partition, so I thought I would install it into Windows's partition. I did and now Kubuntu is there but I cant boot into it.
I could fix it, but that would require another DVD R which I dont exacly want to waste if I can help it as I need to use the rest for other things. I will not be able to get some a long time now. (I dont have much time to get them for at least 5 days)

I wish I had nerver ever upgraded to Natty Narwal.
So heres what happens when I attempt to install kubuntu 10.10 on my machine:

I put in the Kubunutu 10.10 DVD and boot it. It boots fine. It all goes fine..... UNTIL THE SPLASH SCREEN.
The splash screen is on for about 7 minuets and freezes after 7 minuets. The part where it hangs at is * Checking Battery State....

The PC works fine. It has had Kubuntu on it before, but it had Natty Narwal, (its even had 10.10 on it before) the worst build I have ever used. So I formated the HDD and then I had to wait 1 month to get the time to go buy some DVD R's.

I have tried Backtrack 5: Failed due to not being compatibile with my GPU (Artifacts where all over the screen).
Kubuntu (The one im trying to install now): Completed the setup yesterday but installed grub in the wrong partition... FAILED

I have even tried Trinity Dibien: Half Success. Would loved to had used (But XORG was being rubishy to me and I could not get it to work properly with my 7500LE which prevented me from being able to start my GUI. Cornflake did give me some advise on how to get it working, but right now I want to try Kubuntu first and then Trinity on another HDD and see which suits me.)

I absolutely love Linux.
I have been having to use Windows on this machine for the past month.
I so miss Linux. Windows is just not fit for what I want to do, neither does it suit me.

sliqua-jcooter
Veteran
Veteran

Joined: 25 Jan 2010
Age: 36
Gender: Male
Posts: 1,488
Location: Burke, Virginia, USA

27 Jul 2011, 10:46 am

throw the kubuntu install on a spare USB drive. no need to waste a DVD.

You can also do a net install and burn it onto a blank cd: https://help.ubuntu.com/community/Insta ... /MinimalCD

AngelKnight
Veteran
Veteran

Joined: 3 May 2011
Age: 47
Gender: Male
Posts: 749
Location: This is not my home; I'm just passing through

27 Jul 2011, 12:32 pm

Shot in the dark, but try booting the install kernel with "noacpi". And make sure your laptop is plugged in and in a reasonably well ventilated place; it's possible that CPU temperature will get out of hand. And *don't* do this unattended; if you see or smell something bad, pull the power and batteries out.

Madbones
Veteran
Veteran

Joined: 7 Mar 2010
Age: 27
Gender: Male
Posts: 777
Location: In the zone

27 Jul 2011, 12:46 pm

AngelKnight wrote:

Ok, thanks for the advise.
Il try it once I have finished some coding.
It is a Desktop.
Think it would still help?

Tom_Kakes
Deinonychus

Joined: 15 Jul 2011
Gender: Male
Posts: 342

27 Jul 2011, 2:06 pm

When it freezes can you ctl alt f1 to a vt? If so, log in and

dmsg ¦ tail

Post the output (or take a photo).

Tom_Kakes
Deinonychus

Joined: 15 Jul 2011
Gender: Male
Posts: 342

27 Jul 2011, 2:08 pm

Last edited by Tom_Kakes on 27 Jul 2011, 2:11 pm, edited 2 times in total.

Tom_Kakes
Deinonychus

Joined: 15 Jul 2011
Gender: Male
Posts: 342

27 Jul 2011, 2:09 pm

Tom_Kakes wrote:

When it freezes can you ctl alt f1 to a vt? If so, log in and

dmsg ¦ tail

Post the output (or take a photo).

One more thing. You may need to:

dmesg ¦ tail ¦ less

Cornflake
Administrator

Joined: 30 Oct 2010
Gender: Male
Posts: 65,780
Location: Over there

27 Jul 2011, 2:19 pm

Tom_Kakes wrote:

One more thing. You may need to:

dmesg ¦ tail ¦ less

You might as well avoid the pointless step of piping output through tail and just do dmesg | less instead, because at least you'll then be able to read the whole thing. :wink:

Any joy with the investigation of Xorg.0.log, as per your other thread?

_________________
Giraffe: a ruminant with a view.

Tom_Kakes
Deinonychus

Joined: 15 Jul 2011
Gender: Male
Posts: 342

27 Jul 2011, 2:30 pm

Cornflake wrote:

Tom_Kakes wrote:

One more thing. You may need to:

dmesg ¦ tail ¦ less

You might as well avoid the pointless step of piping output through tail and just do dmesg | less instead, because at least you'll then be able to read the whole thing. :wink:

Any joy with the investigation of Xorg.0.log, as per your other thread?

Lol i suppose piping tail through less is a little pointless but you are still able to read the whole log. Just one of my many bad habits

Cornflake
Administrator

Joined: 30 Oct 2010
Gender: Male
Posts: 65,780
Location: Over there

27 Jul 2011, 2:37 pm

Tom_Kakes wrote:

Lol i suppose piping tail through less is a little pointless but you are still able to read the whole log. Just one of my many bad habits

It's a bit worse than a bad habit because unless told otherwise, tail will just pipe the last ten lines. Clues about an error could be present well before that.

_________________
Giraffe: a ruminant with a view.

Tom_Kakes
Deinonychus

Joined: 15 Jul 2011
Gender: Male
Posts: 342

27 Jul 2011, 2:44 pm

Cornflake wrote:

Tom_Kakes wrote:

Lol i suppose piping tail through less is a little pointless but you are still able to read the whole log. Just one of my many bad habits

It's a bit worse than a bad habit because unless told otherwise, tail will just pipe the last ten lines. Clues about an error could be present well before that.

Lol you are right, what I meant to say was dmesg ¦ less sorry for the mix up.

XD

Madbones
Veteran
Veteran

Joined: 7 Mar 2010
Age: 27
Gender: Male
Posts: 777
Location: In the zone

28 Jul 2011, 5:56 am

Cornflake wrote:

Any joy with the investigation of Xorg.0.log, as per your other thread?

Im going to try that later on this week, thanks for the advice

Time to No ACPI.

Page 1 of 1 [ 12 posts ]

Jump to:

Linux install failing Post Reply New Topic

Linux install failing